fpga-stats-monitoring trap enable

Syntax

[ no ] fpga-stats-monitoring trap enable

Release Information

Command introduced in JunosE Release 13.3.0.

Description

Enables the capability to generate SNMP traps on detecting parity error in the user and policy accounting statistics read by the FPGA from memory banks. The no version disables the generation of SNMP traps when parity error is detected, which is the default behavior.

Note:

  • The SNMP traps are generated after detecting parity error only if the router is enabled to perform actions by using the fpga-stats-monitoring-enable command.
  • This command is not displayed in the output of the show configuration command.

Mode

Global Configuration

Related Documentation