ip ignore-df-bit


[ no ] ip ignore-df-bit

Release Information

Command introduced before JunosE Release 7.1.0.


Specifies that the router ignores the don't-fragment bit (DF) if present in the IP header of packets crossing the configured interface; the router then fragments packets even if the bit is present. The no version restores the default behavior, which is to consider the DF bit before fragmenting.

Note: You can also use RADIUS VSA [26-70] to configure the router’s DF bit support. The action configured by the RADIUS VSA takes precedence over the action configured by this command. For more information, see JunosE Broadband Access Configuration Guide.


Interface Configuration, Profile Configuration

Related Documentation