ip dvmrp accept-filter

[ no ] ip dvmrp accept-filter listName1 [ distance ] neighbor-list listName2

Command introduced before JunosE Release 7.1.0.

Filters incoming DVMRP reports in accordance with a standard IP access list. The no version disables the filter.

listName1—Name of the IP access list. If the name is 0, the interface accepts all destinations. You can specify a simple or extended access list; with an extended access list you can specify an address and a subnet mask.
distance—Number in the range 0–255; default value is 0; the distance associated with the DVMRP route when the router determines the RPF interface for the source of a multicast packet
listName2—Name of an access list containing the neighbors from which the router will accept reports. If the name is 0, the interface accepts destinations from all its neighbors.

Interface Configuration