bulkstats collector

Syntax

bulkstats collector collectorIndex
[ collect-mode { auto-xfer | on-file-full | manual-xfer } | description descrip |
interval intrvl | max-size maxSize | primary-receiver primRecvIndex |
secondary-receiver secRecvIndex | single-interval ]

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Creates and configures a collector of bulk statistical data to collect MIB-2 ifTable MIB objects. You can configure up to six collectors. The no version restores the default value for specified options; if no options are specified, the no version deletes the collector.

Options

collectorIndex—Number in the range 1–65535 that identifies the particular data collector
collect-mode—Specifies one of the following collection modes:
- auto-xfer—Agent automatically transfers file when interval expires
- on-file-full—Agent automatically transfers file when it is full
- manual-xfer—Router or user-initiated transfers; default collection mode
descrip—Descriptive information to insert into the bulkstats file
intrvl—Time period in the range 300– 86400 seconds for which the collector transfers data from the router to the receivers; default interval is 360 seconds
maxSize—Maximum size of the file in the range 10240–20971520 bytes; default file size is 2,621,440 bytes
primRecvIndex—Number in the range 1–65535 that identifies the primary receiver to which the router transfers the data; by default the primary receiver is cleared
secRecvIndex—Number in the range 1–65535 that identifies the secondary (backup) receiver to which the router transfers the data; by default the secondary receiver is cleared
single-interval—Specifies that the collector retrieves the bulk statistics data only once; by default, the collector receives the data periodically
*—Indicates that one or more parameters can be repeated multiple times in a list in the command line

Mode

Global Configuration