bridge vpls route-target


[ no ] bridge vplsName vpls route-target { import | export | both } extendedCommunity

Release Information

Command introduced in JunosE Release 7.1.0.


Creates or adds to a list of VPN extended communities that the router uses to determine which routes are imported by a VPLS instance that uses BGP as the signaling protocol. The no version removes a route target from the specified list.

A route is imported into the BGP address family for a specified VPLS instance when both of the following conditions are met:

The bridge vpls route-target command is not valid for a VPLS instance that uses LDP as the signaling protocol. To configure a VPLS instance with LDP signaling, use the mpls ldp vpls vpls-id command and the mpls ldp vpls neighbor command.

Note: The bridge vpls route-target command is available for a VPLS instance only after you issue the bridge vpls transport-virtual-router command, which creates the VPLS instance and configures the transport virtual router.



Global Configuration

Related Documentation