Hide Navigation Pane
Show Navigation Pane
Download
SHA1
CLI Commands Used to Include or Exclude Attributes in RADIUS Messages
You can use the radius include command to enable or disable the inclusion of RADIUS attributes in Acct-on, Acct-off, Access-Request, Acct-Start, and Acct-Stop messages.
Table 53 lists the RADIUS attributes that can be included or excluded in RADIUS messages using the radius include command and the RADIUS messages in which the attributes are supported.
Table 53: RADIUS Attributes Included in Corresponding RADIUS Messages
Attribute Number | Attribute Name | Access-Request | Acct-on | Acct-off | Acct-Start | Acct-Stop |
|---|---|---|---|---|---|---|
[5] | NAS-Port | ✓ | – | – | ✓ | ✓ |
[8] | Framed-IP-Address | ✓ | – | – | ✓ | ✓ |
[9] | Framed-IP-Netmask | – | – | – | ✓ | ✓ |
[13] | Framed-Compression | – | – | – | ✓ | ✓ |
[22] | Framed-Route | – | – | – | ✓ | ✓ |
[25] | Class | – | – | – | ✓ | ✓ |
[26-10] | Ingress-Policy-Name | – | – | – | ✓ | ✓ |
[26-11] | Egress-Policy-Name | – | – | – | ✓ | ✓ |
[26-24] | Pppoe-Description | ✓ | – | – | ✓ | ✓ |
[26-26] | QoS-Profile-Name | – | – | – | ✓ | ✓ |
[26-35] | Acct-Input-Gigapackets | – | – | – | – | ✓ |
[26-43] | Acct-Output-Gigapackets | – | – | – | – | ✓ |
[26-44] | Tunnel-Interface-ID | ✓ | – | – | ✓ | ✓ |
[26-45] | Ipv6-Virtual-Router | – | – | – | – | ✓ |
[26-46] | Ipv6-Local-Interface | – | – | – | – | ✓ |
[26-47] | Ipv6-Primary-DNS | – | – | – | – | ✓ |
[26-48] | Ipv6-Secondary-DNS | – | – | – | – | ✓ |
[26-51] | Disconnect-Cause | – | – | – | – | ✓ |
[26-53] | Service-Description | ✓ | – | – | ✓ | ✓ |
[26-55] | DHCP-Options | ✓ | – | – | ✓ | ✓ |
[26-56] | DHCP-MAC-Address | ✓ | – | – | ✓ | ✓ |
[26-57] | DHCP-GI-Address | ✓ | – | – | ✓ | ✓ |
[26-62] | MLPPP-Bundle-Name | ✓ | – | – | ✓ | ✓ |
[26-63] | Interface-Description | ✓ | – | – | ✓ | ✓ |
[26-81] | L2c-Information | ✓ | – | – | – | – |
[26-92] | L2C-Up-Stream-Data | ✓ | – | – | ✓ | ✓ |
[26-93] | L2C-Down-Stream-Data | ✓ | – | – | ✓ | ✓ |
[26-106] | Ipv6-Ingress-Policy-Name | – | – | – | ✓ | ✓ |
[26-107] | Ipv6-Egress-Policy-Name | – | – | – | ✓ | ✓ |
[26-110] | Acc-Loop-Cir-Id | ✓ | – | – | ✓ | ✓ |
[26-111] | Acc-Aggr-Cir-Id-Bin | ✓ | – | – | ✓ | ✓ |
[26-112] | Acc-Aggr-Cir-Id-Asc | ✓ | – | – | ✓ | ✓ |
[26-113] | Act-Data-Rate-Up | ✓ | – | – | ✓ | ✓ |
[26-114] | Act-Data-Rate-Dn | ✓ | – | – | ✓ | ✓ |
[26-115] | Min-Data-Rate-Up | ✓ | – | – | ✓ | ✓ |
[26-116] | Min-Data-Rate-Dn | ✓ | – | – | ✓ | ✓ |
[26-117] | Att-Data-Rate-Up | ✓ | – | – | ✓ | ✓ |
[26-118] | Att-Data-Rate-Dn | ✓ | – | – | ✓ | ✓ |
[26-119] | Max-Data-Rate-Up | ✓ | – | – | ✓ | ✓ |
[26-120] | Max-Data-Rate-Dn | ✓ | – | – | ✓ | ✓ |
[26-121] | Min-LP-Data-Rate-Up | ✓ | – | – | ✓ | ✓ |
[26-122] | Min-LP-Data-Rate-Dn | ✓ | – | – | ✓ | ✓ |
[26-123] | Max-Interlv-Delay-Up | ✓ | – | – | ✓ | ✓ |
[26-124] | Act-Interlv-Delay-Up | ✓ | – | – | ✓ | ✓ |
[26-125] | Max-Interlv-Delay-Dn | ✓ | – | – | ✓ | ✓ |
[26-126] | Act-Interlv-Delay-Dn | ✓ | – | – | ✓ | ✓ |
[26-127] | DSL-Line-State | ✓ | – | – | ✓ | ✓ |
[26-128] | DSL-Type | ✓ | – | – | ✓ | ✓ |
[26-129] | Ipv6-NdRa-Prefix | – | – | – | – | ✓ |
[26-141] | Downstream-Calculated-Qos | ✓ | – | – | ✓ | ✓ |
[26-142] | Upstream-Calculated-Qos-Rate | ✓ | – | – | ✓ | ✓ |
[26-150] | ICR-Partition-Id | ✓ | – | – | ✓ | ✓ |
[26-159] | DHCP-Option 82 | ✓ | – | – | ✓ | ✓ |
[26-165] | PCP-Server-Name | – | – | – | ✓ | ✓ |
[30] | Called-Station-Id | ✓ | – | – | ✓ | ✓ |
[31] | Calling-Station-Id | ✓ | – | – | ✓ | ✓ |
[32] | NAS-Identifier | ✓ | ✓ | ✓ | ✓ | ✓ |
[41] | Acct-Delay-Time | – | ✓ | ✓ | – | – |
[44] | Acct-Session-Id | ✓ | ✓ | ✓ | – | – |
[45] | Acct-Authentic | – | ✓ | ✓ | – | – |
[49] | Acct-Terminate-Cause | – | – | ✓ | – | – |
[50] | Acct-Multi-Session-Id | ✓ | – | – | ✓ | ✓ |
[51] | Acct-Link-Count | – | – | – | ✓ | ✓ |
[52] | Acct-Input-Gigawords | – | – | – | – | ✓ |
[53] | Acct-Output-Gigawords | – | – | – | – | ✓ |
[55] | Event-Timestamp | – | ✓ | ✓ | ✓ | ✓ |
[61] | NAS-Port-Type | ✓ | – | – | ✓ | ✓ |
[64] | Tunnel-Type | ✓ | – | – | ✓ | ✓ |
[65] | Tunnel-Medium-Type | ✓ | – | – | ✓ | ✓ |
[66] | Tunnel-Client-Endpoint | ✓ | – | – | ✓ | ✓ |
[67] | Tunnel-Server-Endpoint | ✓ | – | – | ✓ | ✓ |
[68] | Acct-Tunnel-Connection | ✓ | – | – | ✓ | ✓ |
[77] | Connect-Info | ✓ | – | – | ✓ | ✓ |
[82] | Tunnel-Assignment-Id | – | – | – | ✓ | ✓ |
[83] | Tunnel-Preference | – | – | – | ✓ | ✓ |
[87] | NAS-Port-Id | ✓ | – | – | ✓ | ✓ |
[90] | Tunnel-Client-Auth-Id | ✓ | – | – | ✓ | ✓ |
[91] | Tunnel-Server-Auth-Id | ✓ | – | – | ✓ | ✓ |
[96] | Framed-Interface-Id | ✓ | – | – | ✓ | ✓ |
[97] | Framed-Ipv6-Prefix | ✓ | – | – | ✓ | ✓ |
[99] | Framed-Ipv6-Route | – | – | – | – | ✓ |
[100] | Framed-IPv6-Pool | – | – | – | – | ✓ |
[123] | Delegated-IPv6-Prefix | – | – | – | – | ✓ |
[144] | DS-Lite-Tunnel-Name | – | – | – | ✓ | ✓ |
[188] | Ascend-Num-In-Multilink | ✓ | – | – | ✓ | ✓ |
All Tunnel-Server-Attributes | ✓ | – | – | ✓ | ✓ | |
All Ipv6-Accounting Attributes | – | – | – | – | ✓ |
