CLI Commands Used to Configure Juniper Networks VSAs

Table 51 lists the Juniper Networks VSAs and the corresponding CLI commands used to modify them. The attributes are listed numerically.

Table 51: CLI Commands Used to Configure Juniper Networks VSAs

Attribute Number

Attribute Name

CLI Command

[26-1]

Virtual-Router

[26-10]

Ingress-Policy-Name

[26-11]

Egress-Policy-Name

[26-14]

Service-Category

[26-15]

PCR

[26-16]

SCR

[26-17]

MBS

[26-24]

Pppoe-Description

[26-26]

QoS-Profile-Name

[26-35]

Acct-Input-Gigapackets

[26-36]

Acct-Output-Gigapackets

[26-44]

Tunnel-Interface-Id

[26-45]

Ipv6-Virtual-Router

[26-46]

Ipv6-Local-Interface

[26-47]

Ipv6-Primary-DNS

[26-48]

Ipv6-Secondary-DNS

[26-51]

Disconnect-Cause

[26-53]

Service-Description

[26-55]

DHCP-Options

[26-56]

DHCP-MAC-Address

[26-57]

DHCP-GI-Address

[26-62]

MLPPP-Bundle-Name

[26-63]

Interface-Desc

[26-81]

L2C-Information

[26-92]

L2C-Up-Stream-Data

[26-93]

L2C-Down-Stream-Data

[26-106]

Ipv6-Ingress-Policy-Name

[26-107]

Ipv6-Egress-Policy-Name

[26-129]

Ipv6-NdRa-Prefix

[26-141]

Downstream-Calculated-Qos-Rate

[26-142]

Upstream-Calculated-Qos-Rate

[26-143]

Max-Clients-Per-Interface

[26-150]

ICR-Partition-Id

[26-151]

IPv6-Acct-Input-Octets

[26-152]

IPv6-Acct-Output-Octets

[26-153]

IPv6-Acct-Input-Packets

[26-154]

IPv6-Acct-Output-Packets

[26-155]

IPv6-Acct-Input-Gigawords

[26-156]

IPv6-Acct-Output-Gigawords

[26-159]

DHCP-Option 82

[26-165]

PCP-Server-Name

Related Documentation