Example: Configuring RADIUS-Specific Attributes

In this example, RADIUS-specific attributes are configured for subscribers attached to a specific PPP profile. You can configure this as follows:

  1. Create a RADIUS per-profile attribute list, and configure the required RADIUS attributes in the list.
    host1(config)#radius per-profile-attr-list abchost1 (config-perprofile-list)#request-type acct-starthost1 (config-perprofile-list)#action-type enablehost1 (config-perprofile-list)#attributes calling-station-id override-nas-ip-addr
  2. Create an AAA profile.
    host1(config)#aaa profile aaaprofile1
  3. Specify the RADIUS attribute list in the AAA profile.
    host1(config-aaa-profile)#radius-perprofilelist-name abc
  4. Create a PPP profile.
    host1(config)#profile pppprofile1
  5. Attach the AAA profile name to the PPP profile.
    host1(config-profile)#ppp aaa-profile aaaprofile1
  6. To view the attributes configured in the RADIUS per-profile attribute list, issue the show radius per-profile-attr-list command.
    host1#show radius per-profile-attr-list abc
    Attribute Name       AccessRequest   AccountStart   AccountStop
    ––––––––––––––       –––––––––––––   ––––––––––––   –––––––––––
    calling-station-id    enabled         disabled       enabled
    override-nas-ip-addr  enabled         enabled        enabled

Related Documentation