List of Figures

Figure 1: Local Address Pool Hierarchy
Figure 2: Shared Local Address Pools
Figure 3: Single PPP Clients per ATM Subinterface
Figure 4: Multiple PPP Clients per ATM Subinterface
Figure 5: Sample Remote Access Network Using RADIUS
Figure 6: RADIUS Relay Server
Figure 7: Using the E Series Router as an LAC
Figure 8: Using the E Series Router as an LNS
Figure 9: Lockout States
Figure 10: Network Model for Dial-Out
Figure 11: Non-PPP Equal Access via the Router
Figure 12: Non-PPP Equal-Access Configuration Example
Figure 13: Passing 802.1p Values to the DHCP Server
Figure 14: DHCP External Server
Figure 15: DHCP External Server
Figure 16: Example of a Dynamic Interface Stack
Figure 17: Example of a Dynamic Subscriber Interface
Figure 18: Subscriber Interfaces over Ethernet
Figure 19: Subscriber Interfaces in a Cable Modem Network
Figure 20: Associating Subnets with a VPN Using Subscriber Interfaces
Figure 21: IP over Ethernet Dynamic Subscriber Interface Configuration
Figure 22: Subscriber Interfaces Using a Destination Address to Demultiplex Traffic
Figure 23: Subscriber Interfaces Using a Source Address to Demultiplex Traffic
Figure 24: IP over Ethernet Dynamic Subscriber Interface Configuration
Figure 25: IP over VLAN over Ethernet Dynamic Subscriber Interface Configuration
Figure 26: IP over Bridged Ethernet over ATM Dynamic Subscriber Interface Configuration
Figure 27: GRE Tunnel Dynamic Subscriber Interface Configuration
Figure 28: Service Manager Configuration Flowchart
Figure 29: Sample Service Definition Macro File
Figure 30: QoS Configuration Dependency Chain
Figure 31: Comparing RADIUS Login and RADIUS COA Methods
Figure 32: Guided Entrance
Figure 33: Input Traffic Flow with Rate-Limit Profile on an External Parent Group for a Combined IPv4/IPv6 Service
Figure 34: Output Traffic Flow with Rate-Limit Profile on an External Parent Group for a Combined IPv4/IPv6 Service