Monitoring Detailed Configuration Information about Specified Sessions
Purpose
Display detailed configuration information about specified sessions.
Action
To display detailed configuration information about specified sessions:
To display L2TP session:
host1#show l2tp session
L2TP session 1/1/1 is Up
1 L2TP session found
To display L2TP session details:
host1#show l2tp session detail
L2TP session 1/1/1 is Up
Configuration
Administrative state is enabled
SNMP traps are enabled
Session status
Effective administrative state is enabled
State is established
Local session id is 25959, peer session id is 2
Statistics packets octets discards errors
Data rx 7 237 1 0
Data tx 6 160 0 0
Session operational configuration
User name is 't1.s1@local'
Tunneling PPP interface atm 0/0.1
Call type is lacIncoming
Call serial number is 0
Bearer type is none
Framing type is none
Proxy LCP was provided
Authentication method was chap Tunnel switch profile is chicago
Meaning
Table 26 lists the show l2tp session command output fields.
Table 26: show l2tp session Output Fields
Field Name | Field Description |
---|---|
Configuration | Configured status of the session |
Administrative state | Administrative status of the destination:
|
SNMP traps | Whether or not the router sends traps to Simple Network Management Protocol (SNMP) for operational state changes |
Session status | Session status of the destination |
Effective administrative state | Most restrictive of the following administrative states: router, destination, tunnel, and session. This setting, rather than the administrative state of the session, determines whether the router can maintain this session or not. |
State | Status of the session: idle, connecting, established, or disconnecting |
Local and peer session id | Names the router uses to identify the session locally and remotely |
Statistics | Information about the traffic for this session |
Session operational configuration | Information received from the peer when the session was created |