radius calling-station-format


radius calling-station-format { delimited | fixed-format [ stacked ] | fixed-format-adapter-embedded [ stacked ] | fixed-format-adapter-new-field [ stacked ] }

no radius calling-station-format

Release Information

Command introduced before JunosE Release 7.1.0.
fixed-format-adapter-embedded and fixed-format-adapter-new-field keywords added in JunosE Release 8.1.0.

stacked keyword added in JunosE Release 9.3.0.


On a virtual router, specifies the format of RADIUS attribute 31, Calling-Station-Id, when the PPP user is terminated at the non-LNS E Series router. Depending on the keyword you use, the virtual router uses the specified format for each interface type, replacing variables in the format with their actual values for your configuration. The no version restores the default Calling-Station-Id format, delimited.


  • Attribute 31, Calling-Station-Id, is used with Attribute 30, Called-Station-Id, in a standard way when the router is the LNS and the LAC is a dial-up LAC (not an E Series router). When the LNS receives the Calling-Station-Id and Called-Station-Id AVPs, the router includes the values as they are, with no format changes in the RADIUS messages.
  • For subscribers connected over the LAG interface in DHCP standalone authenticate mode, the radius override calling-station-id remote-circuit-id command enables RADIUS to use the PPPoE remote circuit ID for the Calling-Station-Id attribute. By default, RADIUS uses a delimited format for the interface description. You cannot use this command to change the value of the Calling-Station-Id attribute.



Global Configuration

Related Documentation