local ip address

Syntax

From L2TP Destination Profile Host Configuration mode:

local ip address ipAddress

no local ip address

From IPsec Transport Profile Configuration mode:

[ no ] local ip address transportIpAddress

From IPsec Tunnel Profile Configuration mode:

local ip address transportIpAddress { pre-share keyString
| pre-share-masked maskedKeyString }

no local ip address

Release Information

Command introduced before JunosE Release 7.1.0.
IPsec Tunnel Profile Configuration mode added in JunosE Release 7.3.0.

Description

From L2TP Destination Profile Host Configuration mode, configures a local IP address for use with a remote host. The no version removes the local IP address from use with a remote host.

From IPsec Transport Profile Configuration mode, specifies the local endpoint of the IPsec transport connection. It also enters Local IPsec Transport Profile Configuration mode. The no version deletes the local IP address.

From IPsec Tunnel Profile Configuration mode, specifies the given local IP address as a server address. The router continues to monitor UDP port 500 for incoming user login requests (that is, IKE source address negotiations). When using global preshared keys, consider the following points:

The no version causes the router to stop monitoring UDP port 500 for user requests and removes any preshared key associations with the local IP address.

Options

Mode

IPsec Transport Profile Configuration, IPsec Tunnel Profile Configuration, L2TP Destination Profile Host Configuration

Related Documentation