Configuring RADIUS Attributes

This chapter identifies the Remote Authentication Dial-In User Service (RADIUS) attributes that JunosE Software supports and describes the RADIUS attributes you can configure with the command-line interface (CLI). RADIUS attributes are discussed in the following sections:

• RADIUS Overview
• RADIUS Platform Considerations
• RADIUS References
• Subscriber AAA Access Messages Overview
• RADIUS IETF Attributes Supported for Subscriber AAA Access Messages
• Juniper Networks VSAs Supported for Subscriber AAA Access Messages
• Processing DNS Addresses from Microsoft RADIUS VSAs for PPP Clients During IPCP
• Subscriber AAA Accounting Messages Overview
• RADIUS IETF Attributes Supported for Subscriber AAA Accounting Messages
• Juniper Networks VSAs Supported for Subscriber AAA Accounting Messages
• RADIUS IETF Attributes Supported for AAA Tunnel Accounting Messages
• AAA Access Messages During IPCP Negotiations for Dual-Stack Subscribers
• AAA Accounting Messages During IPCP Negotiations for Dual-Stack Subscribers
• DSL Forum VSAs in AAA Access and Accounting Messages Overview
• DSL Forum VSAs Supported for AAA Access and Accounting Messages
• RADIUS Attributes Supported for CLI AAA Messages
• CLI Commands Used to Modify RADIUS Attributes
• CLI Commands Used to Configure RADIUS IETF Attributes
• CLI Commands Used to Configure Juniper Networks VSAs
• CLI Commands Used to Include ANCP-Related Juniper Networks VSAs in Access and Accounting Messages
• CLI Commands Used to Include DSL Forum VSAs in Access and Accounting Messages
• CLI Commands Used to Include or Exclude Attributes in RADIUS Messages
• CLI Commands Used to Ignore Attributes when Receiving Access-Accept Messages
• RADIUS Per-Profile Attribute List Configuration Overview
• Example: Configuring RADIUS-Specific Attributes