ipv6 dhcpv6-local limit

Syntax

ipv6 dhcpv6-local limit { atm | vlan | ethernet | pos | interface interfaceType interfaceSpecifier } value

no ipv6 dhcpv6-local limit [ atm | vlan | ethernet | pos | interface interfaceType interfaceSpecifier ]

Release Information

Command introduced in JunosE Release 13.3.0.

Description

Specifies the maximum number of IPv6 prefixes that the DHCPv6 local server can supply to each ATM interface, VLAN, Ethernet subnet, or POS access interface, or to a particular interface or subinterface. The no version restores the default address limit value, 48,000.

Note:

  • Before you issue this command, you must enable the DHCPv6 local server by using the service dhcpv6-local command.
  • The DHCPv6 local server is not supported over the POS access interface.

Options

Mode

Global Configuration

Related Documentation