Verifying Status of PoE Interfaces on an EX Series Switch
Purpose
Verify that the PoE interfaces on the switch are enabled and set to the desired priority settings.
Action
List all the PoE interfaces configured on the switch:
user@switch> show poe interface Interface Enabled Status Max-Power Priority Power-Consumption Class ge-0/0/0 Enabled ON 15.4W Low 12.95W 0 ge-0/0/1 Enabled ON 15.4W High 12.95W 0 ge-0/0/2 Enabled ON 15.4W High 12.95W 0 ge-0/0/3 Enabled ON 15.4W High 12.95W 0 ge-0/0/4 Enabled ON 15.4W Low 12.95W 0 ge-0/0/5 Enabled ON 15.4W Low 12.95W 0 ge-0/0/6 Enabled ON 15.4W Low 12.95W 0 ge-0/0/7 Enabled OFF 15.4W Low 0 W 0
Meaning
The show poe interface command lists PoE interfaces configured on the switch, with their status, priority, power consumption, and class. This command has been executed on a switch with partial PoE (8 PoE ports). The output shows that all eight PoE interfaces are enabled. Interfaces ge-0/0/1 through ge-0/0/3 are configured as priority high. The remaining interfaces were configured with the default values.