• Downloads
• Configuring the VLAN Ethernet Packet Type for Stacked VLAN Dynamic Profiles    

• Related Topics
• Dynamic 802.1Q VLAN Overview
• Configuring VLAN Dynamic Profiles
• Configuring VLAN Interfaces to Use Dynamic Profiles

Configuring the VLAN Ethernet Packet Type for Stacked VLAN Dynamic Profiles

To configure the VLAN Ethernet packet type the stacked VLAN dynamic profile can accept:

1. Access the interface over which you want to create dynamic VLANs.

   user@host# edit interfaces ge-0/0/0

2. Access the VLAN [auto-configure] hierarchy level.

   [edit interfaces ge-0/0/0]

   user@host# edit auto-configure

3. Access the [stacked-vlan-ranges] hierarchy level.

   [edit interfaces ge-0/0/0 auto-configure]

   user@host# edit stacked-vlan-ranges

4. Access the VLAN dynamic profile for which you want to configure VLAN ranges.

   [edit interfaces ge-0/0/0 auto-configure stacked-vlan-ranges]

   user@host# edit dynamic-profile (Stacked VLAN) STACKED-VLAN-PROF1

5. Specify what VLAN Ethernet packet type the stacked VLAN dynamic profile accepts.

   Note: This release supports only INET (IPv4) Ethernet packet types.

   [edit interfaces ge-0/0/0 auto-configure stacked-vlan-ranges]

   user@host# set accept inet