• Downloads
• Configuring Dynamic Access-Internal Routes for DHCP Subscriber Management    

• Related Topics
• Access and Access-Internal Routes for DHCP Subscriber Management
• Configuring Dynamic Access Routes for DHCP Subscriber Management
• Verifying the Configuration of Access and Access-Internal Routes for DHCP Subscriber Management

Configuring Dynamic Access-Internal Routes for DHCP Subscriber Management

You can dynamically configure access-internal routes. Configuring support for access-internal variables is optional, but it ensures that if the next-hop value is missing in the Framed-Routes Attribute [22], values from the access-internal variables are used instead.

To dynamically configure access-internal routes:

1. Specify the IP address and the qualified next-hop address as variables.

   [edit dynamic-profiles profile-name routing-options]

   user@host# edit access-internal route $junos-subscriber-ip-address qualified-next-hop $junos-underlying-interface

   Note: The next-hop statement that is available at the [edit dynamic-profiles profile-name routing-options] hierarchy level is intended for numbered interfaces only. Access routes typically use unnumbered interfaces.

2. Configure the MAC address for the qualified next-hop as a variable.

   user@host# set mac-address $junos-subscriber-mac-address