• Downloads
• mac-limit    

• Related Topics
• allowed-mac
• Example: Configuring Port Security, with DHCP Snooping, DAI, MAC Limiting, and MAC Move Limiting, on an EX Series Switch
• Example: Configuring MAC Limiting, Including Dynamic and Allowed MAC Addresses, to Protect the Switch from Ethernet Switching Table Overflow Attacks
• Example: Configuring MAC Limiting to Protect the Switch from DHCP Starvation Attacks
• Configuring MAC Limiting (CLI Procedure)
• Configuring MAC Limiting (J-Web Procedure)
• Configuring Autorecovery From the Disabled State on Secure or Storm Control Interfaces (CLI Procedure)

mac-limit

Syntax

Hierarchy Level

Release Information

Statement introduced in JUNOS Release 9.0 for EX Series switches.

The default value for the action option was changed in JUNOS Release 9.5 for EX Series switches.

The shutdown option was modified in JUNOS release 9.6 for EX Series switches.

Description

Specify the number of MAC addresses to dynamically add to the MAC address cache for this access interface (port) and the action to be taken by the switch if the MAC address learning limit is exceeded on the interface (port).

Default

The default action is drop.

Options

limit—Maximum number of MAC addresses.

action action—(Optional) Action to take when the MAC address limit is exceeded:

• drop—Drop the packet and generate an alarm, an SNMP trap, or a system log entry. This is the default.
• log—Do not drop the packet but generate an alarm, an SNMP trap, or a system log entry.
• none—No action.
• shutdown—Disable the interface and generate an alarm. If you have configured the switch with the port-error-disable statement, the disabled interface recovers automatically upon expiration of the specified disable timeout. If you have not configured the switch for autorecovery from port error disabled conditions, you can bring up the disabled interfaces by running the clear ethernet-switching port-error command.

Required Privilege Level

routing—To view this statement in the configuration.
routing–control—To add this statement to the configuration.