Downloads
group

Related Topics
Configuring a Dynamic Profile for Client Access
For information about configuring static group membership, see “Enabling IGMP Static Group Membership” in the JUNOS Multicast Protocols Configuration Guide

group

Syntax

For group configuration with a source, use the following syntax:


                        
                           group ip-address {
                           
                           source ip-address;
                           
                           }

For group configuration without a source, use the following syntax:


                        
                           group group;

Hierarchy Level


                        
                           [edit dynamic-profiles profile-name protocols igmp interface interface-name static],
                           
                           [edit logical-systems logical-system-name protocols igmp interface interface-name static],
                           
                           [edit protocols igmp interface interface-name static]

Release Information

Statement introduced before JUNOS Release 7.4.

The [edit dynamic-profiles profile-name protocols igmp interface interface-name static] hierarchy added in JUNOS Release 9.2.

Description

When configuring with a source address, configure the IGMP multicast group address that receives data on an interface and a source address for certain packets. For configuration without a source address, configure only the IGMP multicast group address that receives data on an interface.

Options

ip-address—Group IP address.
group—Name of group.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.