show dhcp relay statistics
Syntax
- show dhcp relay statistics
- <logical-system logical-system-name>
- <routing-instance routing-instance-name>
Release Information
Command introduced in JUNOS Release 8.3.
Description
Display Dynamic Host Configuration Protocol (DHCP) relay statistics.
Options
logical-system logical-system-name — (Optional) Perform this operation on the specified logical system. If you do not specify a logical system name, statistics are displayed for the default logical system.
routing-instance routing-instance-name — (Optional) Perform this operation on the specified routing instance. If you do not specify a routing instance name, statistics are displayed for the default routing instance.
Required Privilege Level
view
List of Sample Output
show dhcp relay statisticsOutput Fields
Table 1 lists the output fields for the show dhcp relay statistics command. Output fields are listed in the approximate order in which they appear.
Table 1: show dhcp relay statistics Output Fields
Sample Output
user@host> show dhcp relay statisticsPackets dropped:
Total 30
Bad hardware address 1
Bad opcode 1
Bad options 3
Invalid server address 5
No available addresses 1
No interface match 2
No routing instance match 9
No valid local address 4
Packet too short 2
Read error 1
Send error 1
Option 60 1
Option 82 2
Messages received:
BOOTREQUEST 116
DHCPDECLINE 0
DHCPDISCOVER 11
DHCPINFORM 0
DHCPRELEASE 0
DHCPREQUEST 105
Messages sent:
BOOTREPLY 44
DHCPOFFER 11
DHCPACK 11
DHCPNAK 11

