request virtual-chassis vc-port

Syntax


                        
                           request virtual-chassis vc-port set interface vcp-interface-name
<member member-id> <disable>

Release Information

Command introduced in JUNOS Release 9.0 for EX Series switches.

Description

Disable or enable a Virtual Chassis port (VCP) for a dedicated VCP on the rear panel of the Virtual Chassis.

Options

interface vcp-interface-name — Name of the interface to enable or disable. Specify either vcp-0 or vcp-1.

member member-id — (Optional) Enable or disable the specified VCP on the specified member of the Virtual Chassis configuration.

disable — (Optional) Disable the specified VCP. If you omit this keyword, the command enables the dedicated VCP.

Additional Information

If you omit member member-id, this command defaults to disabling or enabling the dedicated VCP on the switch where the command is issued. The dedicated VCPs are enabled in the factory default configuration.

Required Privilege Level

system-control

List of Sample Output

request virtual-chassis vc-port set interface vcp-0 disable
request virtual-chassis vc-port set interface vcp-0 member 3 disable

Sample Output

request virtual-chassis vc-port set interface vcp-0 disable

user@host> request virtual-chassis vc-port set
                           interface vcp-0 disable

To check the results of this command, use the show virtual-chassis vc-port command.

request virtual-chassis vc-port set interface vcp-0 member 3 disable

user@host> request virtual-chassis vc-port set
                           interface vcp-0 member 3 disable