Command introduced before JUNOS Release 7.4.
(J Series routing platform only) Display Dynamic Host Configuration Protocol (DHCP) server statistics.
This command has no options.
view and system
clear system services dhcp statistics
Table 134 describes the output fields for the show system services dhcp statistics command. Output fields are listed in the approximate order in which they appear.
Table 134: show system services dhcp statistics Output Fields
show system services dhcp statistics
user@host> show system services dhcp statistics
DHCP lease times:
Default lease time 1 hour
Minimum lease time 2 hours
Maximum lease time infinite
Packets dropped:
Total 0
Bad hardware address 0
Bad opcode 0
Invalid server address 0
No available addresses 0
No interface match 0
No routing instance match 0
No valid local address 0
Packet too short 0
Read error 0
Send error 0
Messages received:
BOOTREQUEST 0
DHCPDECLINE 0
DHCPDISCOVER 0
DHCPINFORM 0
DHCPRELEASE 0
DHCPREQUEST 0
Messages sent:
BOOTREPLY 0
DHCPACK 0
DHCPOFFER 0
DHCPNAK 0