Command introduced in JUNOS Release 9.6 for the TX Matrix Plus router.
(TX Matrix Plus router only) Display environmental information about the Connector Interface Panel (CIP).
none — Display environmental information about all the CIP.
slot — Display environmental information about a specific CIP. Replace slot with a value from 0 through 1.
view
Table 45 lists the output fields for the show chassis environment cip command. Output fields are listed in the approximate order in which they appear.
Table 45: show chassis environment cip Output Fields
user@host> show chassis environment
cipCIP 0 status:
State Online Active
Temperature 23 degrees C / 73 degrees F
Power 1
1.0 V 1015 mV
1.8 V 1817 mV
2.5 V 2497 mV
3.3 V 3325 mV
3.3 V bias 3300 mV
5.0 V 5001 mV
9.0 V 9049 mV
Bus Revision 74
CIP 1 status:
State Online Inactive
Temperature 24 degrees C / 75 degrees F
Power 1
1.0 V 1008 mV
1.8 V 1820 mV
2.5 V 2504 mV
3.3 V 3325 mV
3.3 V bias 3306 mV
5.0 V 5091 mV
9.0 V 9049 mV
Bus Revision 74