Table 278 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot stateful firewall services. Commands are listed in alphabetical order.
Table 278: Stateful Firewall Services Operational Mode Commands
Task |
Command |
|---|---|
Clear stateful firewall flows. |
|
Clear stateful firewall Session Initiation Protocol (SIP) call information. |
|
Clear stateful firewall SIP register information. |
|
Clear stateful firewall statistics. |
|
Display stateful firewall conversation information. |
|
Display stateful firewall flow information. |
|
Display stateful firewall SIP call information. |
|
Display stateful firewall SIP register information. |
|
Display stateful firewall statistics. |
|
Display statistics information for the application protocol SIP. |
show services stateful-firewall statistics application-protocol sip |
 |
Note: Stateful firewall services are supported on the adaptive services interface on the following routers:
Stateful firewall services are also supported on the redundant adaptive services interface (rspnumber) on M Series and T Series routers. For information about how to configure stateful firewall services, see the JUNOS Services Interfaces Configuration Guide. |