Simple Network Management Protocol Operational Mode Commands

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Table 103 summarizes the command-line interface (CLI) commands that allow you to monitor the Simple Network Management Protocol (SNMP). Commands are listed in alphabetical order.

Table 103: SNMP Operational Commands

Task	Command
Clear SNMP statistics.	clear snmp statistics
Spoof (mimic) the behavior of an SNMP trap.	request snmp spoof-trap
Display information about health monitor alarms.	show snmp health-monitor
Display statistics about SNMP informs.	show snmp inform-statistics
Display local Management Information Base (MIB) object values through the command-line interface (CLI).	show snmp mib
Display information about Remote Monitoring (RMON) alarms and events.	show snmp rmon
Display statistics about SNMP packets sent and received.	show snmp statistics
Display SNMP version 3 statistics.	show snmp v3

Note: For information about how to configure SNMP, see the JUNOS Network Management Configuration Guide.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]