Service Sets Operational Mode Commands

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Table 272 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot service sets. Commands are listed in alphabetical order.

Table 272: Service Sets Operational Mode Commands

Task	Command
Clear service sets statistics.	clear services service-sets statistics packet-drops
Display service sets CPU utilization.	show services service-sets cpu-usage
Display services sets memory utilization.	show services service-sets memory-usage
Display service sets statistics.	show services service-sets statistics packet-drops
Displays services sets TCP MSS statistics.	show services service-sets statistics tcp-mss
Display service sets summary information.	show services service-sets summary

Note: Service sets are supported on the adaptive services interface on the following routers:

J Series routers—sp-pim/0/slot
M Series and T Series routers—ms-fpc/pic/port or sp-fpc/pic/port

Service sets are also supported on the redundant adaptive services interface (rspnumber) on M Series and T Series routers.

Note: For information about how to configure service sets, see the JUNOS Services Interfaces Configuration Guide.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]