Real-Time Performance Monitoring Operational Mode Commands

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Table 8 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot real-time performance monitoring (RPM). Commands are listed in alphabetical order.

Table 8: RPM Operational Mode Commands

Task	Command
Clear Two-Way Active Measurement Protocol (TWAMP) connections and associated sessions.	clear services rpm twamp server connection
Show configured probe servers.	show services rpm active-servers
Show the results of the last 50 completed probes for each RPM instance.	show services rpm history-results
Show probe results.	show services rpm probe-results
Show TWAMP connections.	show services rpm twamp server connection
Show TWAMP sessions.	show services rpm twamp server session

Note: For information about how to configure RPM, see the JUNOS Services Interfaces Configuration Guide.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]