PGCP Operational Mode Commands for the BGF Feature

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Table 263 summarizes the PGCP command-line interface (CLI) commands you can use to monitor and troubleshoot the Packet Gateway Control Protocol (PGCP) service that is used for the border gateway function (BGF) feature. Commands are listed in alphabetical order.

Table 263: PGCP Services Operational Mode Commands

Task	Command
Clear gates on a virtual BGF.	clear services pgcp gates
Clear statistical information.	clear services pgcp statistics
Display information about the configuration for a virtual BGF.	show services pgcp active-configuration
Display in-depth information about a particular gate on a virtual BGF.	show services pgcp gate
Display summary information about all gates on a virtual BGF.	show services pgcp gates
Display information about H.248 root terminations.	show services pgcp root-termination
Display information about BGF statistics.	show services pgcp statistics
Display information about conversations.	show services pgcp conversations
Display information about flows.	show services pgcp flows
Display summary information about terminations.	show services pgcp terminations

PGCP services are supported on Adaptive Service (AS) PICS, MultiServices (sp-fpc/pic/port) PICS, and the MultiServices Dense Port Concentrator (MS-DPC) on the following routers:

Juniper Networks M120 Multiservice Edge Router
Juniper Networks M320 Multiservice Edge Router
Juniper Networks T640 Core Router

Note: For information about how to use PGCP services to monitor the BGF feature, see the JUNOS Multiplay Solutions Guide.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]