Data Link Switching Operational Mode Commands

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Table 181 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot data link switching (DLSw) on J Series routers. Commands are listed in alphabetical order.

Table 181: DLSw Operational Mode Commands

Task	Command
Clear DLSw reachability.	clear dlsw reachability
Display DLSw peer capability.	show dlsw capabilities
Display information about configured DLSw circuits.	show dlsw circuits
Display DLSw peer information.	show dlsw peers
Display information about the cached media access control (MAC) entries.	show dlsw reachability
Display logical link control type 2 (LLC2) redundancy information for DLSw.	show llc2 redundancy
Display LLC2 redundancy statistics.	show llc2 redundancy interface statistics
Display LLC2 redundancy MAC translation information.	show llc2 redundancy mac-translation
Display LLC2 redundancy tracking information.	show llc2 redundancy track

Note: DLSw is supported only on the J Series routing platform.

Note: For information about how to configure DLSw, see the JUNOS Services Interfaces Configuration Guide or the J Series Services Router Advanced WAN Access Configuration Guide.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]