Connectivity Operational Mode Commands

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Table 3 summarizes the command-line interface (CLI) commands you can use to perform and monitor connectivity functions. Commands are listed in alphabetical order.

Table 3: Connectivity Operational Mode Commands

Task	Command
Check host reachability and network connectivity.	ping
Check the reachability of a remote Asynchronous Transfer Mode (ATM) node.	ping atm
Check the operability of a remote Connectionless Network Service (CLNS) node.	ping clns
Check the operability of a Layer 2 circuit.	ping mpls l2circuit
Check the operability of a Layer 2 virtual private network (VPN).	ping mpls l2vpn
Check the operability of a Layer 3 VPN.	ping mpls l3vpn
Check the operability of a MPLS connection.	ping mpls ldp
Check the operability of MPLS label-switched path (LSP) endpoint connections.	ping mpls lsp-end-point
Check the operability of MPLS RSVP-signaled LSP connections.	ping mpls rsvp
Check the operability of virtual private LAN service (VPLS) connections.	ping vpls instance

Note: For information about related tasks performed by network operations center (NOC) personnel, see the JUNOS Baseline Network Operations Guide.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]