Command-Line Interface Operational Mode Commands

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Table 88 summarizes the command-line interface (CLI) commands you can use to perform and monitor CLI management functions. Commands are listed in alphabetical order.

Table 88: CLI Operational Mode Commands

Task	Command
Clear the logical system view and return to a full router view.	clear cli logical-system
Set the CLI to complete partial command entries.	set cli complete-on-space
Set the current working directory.	set cli directory
Set the maximum time that an individual session can be idle before the user is logged off the router.	set cli idle-timeout
Set the CLI to the specified logical routing instance.	set cli logical-system
Set the CLI prompt.	set cli prompt
Set the CLI to prompt you to restart the router after a software upgrade.	set cli restart-on-upgrade
Set the number of lines on the screen.	set cli screen-length
Set the number of characters on a line.	set cli screen-width
Set the terminal type.	set cli terminal
Timestamp CLI output.	set cli timestamp
Set the system date and time.	set date
Display all CLI settings.	show cli
Display login permissions for the current user.	show cli authorization
Display the current working directory.	show cli directory
Display a list of previous CLI commands.	show cli history

Note: For information about how to configure CLI parameters, see the JUNOS CLI User Guide.

For information about related tasks performed by network operations center (NOC) personnel, see the JUNOS Baseline Network Operations Guide.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]