Accounting Operational Mode Commands

Table 35 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot accounting options. Commands are listed in alphabetical order.

Table 35: Accounting Operational Mode Commands

An accounting profile requires a collection interval, specific fields and counter names on which to collect statistics, and a file to contain the data. You can configure the following types of accounting profiles:

• Interface—Collects error and statistic information for input and output packets on a particular physical or logical interface.
• Filter—Collects count statistics for firewall filters.
• Routing Engine—Collects Routing Engine statistics, including uptime and CPU load.
• Class usage—Collects statistics for particular source and destination classes, maintaining packet counts based on the entry and exit points for traffic passing through the network:
  • Source class usage (SCU) tracks traffic originating from specific prefixes on the provider core and destined for specific prefixes on the customer edge.
  • Destination class usage (DCU) tracks traffic originating from the customer edge and destined for specific prefixes on the provider core router.

Note: For information about configuring accounting profiles, see the JUNOS Network Management Configuration Guide.