[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Associating Fast Update Filters to Interfaces in a Dynamic Profile

After you configure the fast update filter, you reference the filter in the interfaces stanza of a dynamic profile. When the dynamic profile instantiates a subscriber session, the router applies the terms of the filter to the interface.

To apply a fast update filter to an interface in a dynamic profile:

  1. Access the dynamic profile you want to use.
    [edit]
    user@host# edit dynamic-profile myProfile
  2. Specify the interface for the dynamic profile—use the dynamic interface variable.
    [edit dynamic-profile myProfile]
    user@host# edit interfaces $junos-interface-ifd-name
  3. Specify the underlying interface—use the unit number variable.
    [edit dynamic-profile myProfile interfaces “$junos-interface-ifd-name”]
    user@host# edit unit $junos-underlying-interface-unit
  4. Specify the family.
    [edit dynamic-profile myProfile interfaces “$junos-interface-ifd-name” unit “$junos-underlying-interface-unit”]
    user@host# edit family inet
  5. Specify the filters that you want to apply to the interface.
    [edit dynamic-profile myProfile interfaces “$junos-interface-ifd-name” unit “$junos-underlying-interface-unit” family inet]
    user@host# set filter input httpFilter
    user@host# set filter output myOutFilter

Related Topics

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

[an error occurred while processing this directive]