[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

sshcfg

Syntax

sshcfg -T system:mm[x] <-cstatus (enabled | disabled)> <-hk (rsd | dsa | gen)> <-v1 (on | off)>

Release Information

Command supported by JUNOS Release 9.1 and later.

Description

(JCS 1200 platform only) Display or configure SSH access on the JCS management module.

Options

-T system:mm[x]—Specify the JCS management module as the target of the command. Replace x with a value of 1 or 2.

-cstatus (enabled | disabled)—(Optional) Enable or disable the SSH server on the JCS management module.

-hk gen—(Optional) Generate a host key for the JCS management module.

-hk (rsa | dsa)—(Optional) Display RSA or DSA host key information for the JCS management module.

-v1 (on | off)—(Optional) Enable or disable SSH v1 on the JCS management module. (SSH v2 is always enabled.)

Required Privilege Level

operator (display)

supervisor (display or configure)

List of Sample Output

sshcfg (Display)
sshcfg (Configure)

Output Fields

Table 15 lists the output fields for the sshcfg command. Output fields are listed in the approximate order in which they appear.

Table 15: sshcfg Output Fields

Field Name	Field Description
v1	SSH v1 status (On or Off). SSH v2 is always enabled (On).
cstatus	Status of the CLI SSH server (enabled or disabled).
CLI SSH port	Port number assigned to the CLI SSH server.
sstatus	Status of the SMASH (secure mashup) SSH server (enabled or disabled).
SMASH SSH port	Port number assigned to the SMASH SSH server.
ssh-dss	DSS fingerprint for the SSH server. This fingerprint is used to verify the authenticity of the server.
ssh-rsa	RSA fingerprint for the SSH server. This fingerprint is used to verify the authenticity of the server.
x SSH public keys	Number of SSH public keys installed.
x Locations	Number of locations available to store SSH public keys.

Sample Output

sshcfg (Display)

system> sshcfg -T system:mm[1]

-v1 off 
-cstatus enabled 
CLI SSH port 22 
-sstatus disabled 
SMASH SSH port 50024 
ssh-dss 2048 bit fingerprint: 27:ee:bd:a9:27:28:d8:a5:93:03:3d:8e:77:d0:38:2c 
ssh-rsa 2048 bit fingerprint: 66:c9:73:4f:18:11:02:10:f3:05:6e:d7:27:05:a5:01 
2 SSH public keys installed 
10 locations available to store SSH public keys

sshcfg (Configure)

system> sshcfg -T system:mm[1] -hk gen -cstatus
               enabled

OK