You can display voltage information for components in the JCS chassis. This information is useful for viewing current voltage values and voltage threshold settings.
Display voltage information for components in the JCS chassis using the JCS CLI volts command.
The following sample output appears when voltage information is displayed for a JCS management module:
system> volts –T mm[1]Warning Source Value Warning Reset Hysteresis ------ ------ --------------- -------------- ---------- +5v +4.84 (+4.50,+5.25) (+4.85,+5.15) (+0.35,+0.10) +3.3v +3.26 (+3.00,+3.47) (+3.20,+3.40) (+0.20,+0.07) +12v +12.03 (+10.80,+12.60) (+11.64,+12.36) (+0.84,+0.24) -5v -4.90 (-5.50,-4.75) (-5.15,-4.85) (+0.35,+0.10) +2.5v +2.48 (+2.25,+2.63) (+2.42,+2.58) (+0.17,+0.05) +1.8v +1.76 (+1.62,+1.89) (+1.74,+1.86) (+0.12,+0.03)
The following sample output appears when voltage information is displayed for a JCS Routing Engine:
system> volts –T blade[1]Source Value Critical --------------- ------- ---------------- Planar 0.9V +0.88 (+0.40,+1.50) Planar 12V +12.12 (+10.20,+13.80) Planar 3.3V +3.30 (+2.78,+3.79) Planar 5V +4.90 (+4.23,+5.74) Planar VBAT +3.05 (+2.54,+3.44)