Configuring an RSD and Creating PSDs

To configure a Root System Domain (RSD), create Protected System Domains (PSDs) under it, and assign FPCs from the T-series routing platform and Routing Engines from the JCS 1200 routing platform to each PSD, perform the following steps.

Note: Several of the values set through the following JUNOS configuration statements must match the values set by the baydata command through the JCS management module CLI. For the baydata command format, see baydata.

1. Log in to the master Routing Engine on the T-series routing platform.
2. At the [edit chassis system-domains] hierarchy level, include the root-domain-id root-domain-id configuration statement. The range of values for root-domain-id is 1 through 3.

   This value for this statement must match the SD value set through the baydata command.

3. At the [edit chassis system-domains] hierarchy level, include the protected-system-domains psdn configuration statement. The range of values n is 1 to 31.

   Note: The PSD identifier must be unique for each RSD. For example, if PSD1 is assigned to RSD1, neither RSD2 nor RSD3 can contain PSD1.

   The value for this statement must match the PSD value set through the baydata command.

4. At the [edit chassis system-domains protected-system-domains psdn] hierarchy level, include the following statements:
   • control-plane-bandwidth-percent percent—Assign the percentage of bandwidth that exists on the JCS switch modules and the T-series control boards (T-CBs) to the PSD. The range of values is 1 to 100. Allocating bandwidth prevents potential overutilization by one PSD over another.
   • description description—Provide a description for the PSD.
   • fpcs [ slot-numbers ]—Assign FPCs to the PSD.

     For JUNOS Software Release 9.4, supported values for slot-numbers are 0 through 7.

   • control-system-id control-system-id—Assign an ID to the JCS 1200 platform. The value for control-system-id can be 1 through 3.

     The value for this statement must match the JCS value set through the baydata command.

   • control-slot-numbers [ control-slot-numbers ]—Assign a Routing Engine or pair of redundant Routing Engines on the JCS 1200 platform to the PSD.

     The value for control-slot-numbers for the primary Routing Engine assigned to the PSD must match the REP value set through the JCS management module baydata command. Similarly, the value for control-slot-numbers for the backup Routing Engine must match the REB value set through the baydata command. In the absence of any JUNOS CLI configuration that affects mastership, the Routing Engine in the slot indicated by REP will boot as the master, and the Routing Engine in slot REB will boot as the backup. See baydata.

Related Topics

• Protected System Domain Overview
• System Domains Configuration Hierarchy
• Example: Configuring a JCS 1200 Platform and a Single T-series Router
• Example: Configuring a JCS 1200 Platform and Multiple T-series Routers