[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]
env
Syntax
env -T target
Release Information
Command supported by JUNOS Release 9.1
and later.
Description
(JCS management module CLI) Set the persistent
environment for commands you enter in the JCS management module. Commands
entered during the remainder of the login session apply to this target,
unless you specify a new command target.
Options
-T target—Specify
the target of the command. Command targets include:
- system—JCS 1200 platform. This is the default
command target.
- system:mm[x]—JCS management
module. Replace x with a value of 1 or 2.
- system:switch[x]—JCS
switch module. Replace x with a value
of 1 or 2.
- system:blade[x]—JCS
Routing Engine (blade). Replace x with
a value of 1 through 12.
- system:power[x]—JCS
power supply. Replace x with a value
of 1 through 4.
- system:blower[x]—JCS
fan (blower). Replace x with a value
of 1 through 4.
- system:mt[x]—JCS media
tray. Replace x with a value of 1 or 2.
Required Privilege Level
operator
Related Topics
List of Sample Output
env (JCS Management Module)
Output Fields
When you enter this command,
you are provided feedback on the status of your request. The command
prompt changes to reflect the new command target.
Sample Output
env (JCS Management Module)
system> env –T system:mm[1]
[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]