 |
Note: After you issue the request system snapshot command, you cannot return to the previous version of the software because the running and backup copies of the software are identical. |
To verify that the new version of the JUNOS software is running as expected after the reinstall, follow these steps:
Purpose
Compare the operation of the system before and after the reinstall to ensure that everything is working as expected.
Action
To obtain system information, use the following commands:
- user@host> show version
- user@host> show chassis hardware
- user@host> show chassis environment
- user@host> show system boot-messages
- user@host> show configuration
- user@host> show interface terse
- user@host> show bgp summary
- user@host> show isis adjacency brief
- user@host> show ospf neighbor brief
- user@host> show system storage
Compare the information from these commands with the information you obtained before the reinstall.
Purpose
After a week or so, when you are satisfied that the new software is running successfully, we recommend that you back up the reinstalled software.
Action
To back up the reinstalled software, use the following JUNOS CLI operational mode command:
The root file system is backed up to /altroot, and /config is backed up to /altconfig. The root and /config file systems are on the router’s internal flash drive, and the /altroot and /altconfig file systems are on the router’s hard drive.
|
Note: After you issue the request system snapshot command, you cannot return to the previous version of the software because the running and backup copies of the software are identical. |