[an error occurred while processing this directive] [an error occurred while processing this directive]

Configuring SONET/SDH Parameters on ATM Interfaces

When configuring ATM1 and ATM2 IQ SONET/SDH interfaces, you can also include the following statements in the sonet-options statement to set SONET/SDH parameters on ATM interfaces:

[edit interfaces at-fpc/pic/port]
sonet-options {
aps {
milliseconds;
authentication-key key;
force;
milliseconds;
lockout;
neighbor address;
paired-group group-name;
protect-circuit group-name;
request;
revert-time seconds;
working-circuit group-name;
}
bytes {
e1-quiet value;
f1 value;
f2 value;
s1 value;
z3 value;
z4 value;
}
(local | remote);
(payload-scrambler | no-payload-scrambler);
rfc-2615;
trigger {
defect ignore {
up milliseconds down milliseconds;
}
}
(z0-increment | no-z0-increment);
}

For information about configuring specific SONET/SDH statements, see .

Updated: 2009-04-07

[an error occurred while processing this directive]