Configuring Communication with Directly Attached ATM Switches and Routers
For ATM1 and ATM2 IQ interfaces, you can configure communication with directly attached ATM switches and routers to enable querying of the IP addresses and switch port numbers. You query the switch or router by entering the following show command:
The routing platform uses VC 0.16 to communicate with the ATM switch or router.
To configure communication between the routing platform and its directly attached ATM switches and routers, include the ilmi statement at the [edit interfaces interface-name atm-options] hierarchy level:
- [edit interfaces interface-name atm-options]
- ilmi;
Example: Configuring Communication with Directly Attached ATM Switches and Routers
Enable an interface to communicate directly with an ATM switch or router:
- [edit interfaces]
- at-0/1/0 {
-
- atm-options {
- vpi 0;
- ilmi;
- }
-
- unit 0 {
- vci 0.120;
-
- family inet {
- address 10.33.33.1/30;
- }
- }
- }