• Download PDFs
• Configuring a Subscriber Interface with a Static VLAN Interface  

• Related Topics
• For information about configuring logical interfaces and static VLAN interfaces, see the JUNOS Network Interfaces Configuration Guide
• Static Subscriber Interfaces and VLAN Overview

Configuring a Subscriber Interface with a Static VLAN Interface

This topic describes how to configure a subscriber interface with a static VLAN interface.

After you configure the static VLAN interface, you can reference it in a dynamic profile.

To configure a subscriber interface over a VLAN:

1. Configure the static VLAN interface and enable VLAN tagging.

   [edit interfaces]

   ge-5/0/0 {

   vlan-tagging;

   }

2. Configure the units and assign the VLAN IDs.

   unit 1 {

   proxy-arp;

   vlan-id 1;

   family inet {

   unnumbered-address lo0.0 preferred-source-address 192.1.1.1;

   }

   }

   unit 2 {

   proxy-arp;

   vlan-id 2;

   family inet {

   unnumbered-address lo0.0 preferred-source-address 192.1.1.1;

   }

   }