• Download PDFs
• vlan-tags  

vlan-tags

Syntax

Hierarchy Level

Release Information

Statement introduced before JUNOS Release 7.4.

Description

For Gigabit Ethernet IQ and IQE interfaces only, binds TPIDs and 802.1Q VLAN tag IDs to a logical interface. You must include the stacked-vlan-tagging statement at the [edit interfaces interface-name] hierarchy level.

Note: The inner-range vid1–vid2 option is supported on MX-series with IQE PICs only.

Options

inner tpid.vlan-id—A TPID and a valid VLAN identifier.

Range: For VLAN ID, 1 through 4094. VLAN ID 0 is reserved for tagging the priority of frames.

inner-range vid1–vid2—For MX-series routers with Enhanced IQ (IQE) PICs only; specify a range of VLAN IDs where vid1 is the start of the range and vid2 is the end of the range.

Range: For VLAN ID, 1 through 4094. VLAN ID 0 is reserved for tagging the priority of frames.

outer tpid.vlan-id—A TPID and a valid VLAN identifier.

Range: For VLAN ID, 1 through 511 for normal interfaces, and 512 through 4094 for VLAN CCC interfaces. VLAN ID 0 is reserved for tagging the priority of frames.

Usage Guidelines

See Configuring Dual VLAN Tags.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.