Download PDFs
vci

vci

Syntax


                        
                           vci vpi-identifier.vci-identifier;

Hierarchy Level


                        
                           [edit interfaces at-fpc/pic/port unit logical-unit-number],
                           
                           [edit interfaces at-fpc/pic/port unit logical-unit-number family family address address multipoint-destination address],
                           
                           [edit logical-systems logical-system-name interfaces at-fpc/pic/port unit logical-unit-number],
                           
                           [edit logical-systems logical-system-name interfaces at-fpc/pic/port unit logical-unit-number family family address address multipoint-destination address]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

For ATM point-to-point logical interfaces only, configure the virtual circuit identifier (VCI) and virtual path identifier (VPI).

To configure a VPI for a point-to-multipoint interface, specify the VPI in the multipoint-destination statement.

VCIs 0 through 31 are reserved for specific ATM values designated by the ATM Forum.

Options

vci-identifier—ATM virtual circuit identifier. Unless you configure the interface to use promiscuous mode, this value cannot exceed the largest numbered VC configured for the interface with the maximum-vcs option of the statement.
vpi-identifier—ATM virtual path identifier.

Usage Guidelines

See Configuring a Point-to-Point ATM1 or ATM2 IQ Connection.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

vci