oam-period

Syntax


                        
                           oam-period (disable | seconds);

Hierarchy Level


                        
                           [edit interfaces interface-name atm-options
                              vpi vpi-identifier],
                           
                           [edit interfaces interface-name unit logical-unit-number], 
                           
                           [edit interfaces interface-name unit logical-unit-number family family address address multipoint-destination address],
                           
                           [edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number], 
                           
                           [edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family family address address multipoint-destination address]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

For ATM encapsulation only, configure the OAM F5 loopback cell period. Not supported on ATM-over-SHDSL interfaces.

For ATM2 IQ PICs only, configure OAM F4 loopback cell period at the [edit interfaces interface-name atm-options vpi vpi-identifier] hierarchy level.

Default

If you omit this statement, OAM F5 loopback cells are not originated, but the interface still responds if it receives OAM F5 loopback cells.

Options

disable—Disable OAM loopback cell transmit feature.
seconds—OAM loopback cell period.

Usage Guidelines

See Defining the ATM OAM F5 Loopback Cell Period.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.