loopback-clear-timer

Syntax


                        
                           loopback-clear-timer seconds;

Hierarchy Level


                        
                           [edit interfaces interface-name unit logical-unit-number ppp-options],
                           
                           [edit logical-systems logical-system-name interfaces interface-nameunit logical-unit-number ppp-options]

Release Information

Statement introduced in JUNOS Release 8.5.

Description

For interfaces with PPP, PPP TCC, PPP over Ethernet, PPP over ATM, and PPP over Frame Relay encapsulations, configure a loop detection clear timer for the Link Control Protocol (LCP) component of a PPP session.

Options

seconds—The time in seconds to wait before the loop detection flag is cleared if it is not cleared by the protocol.

Usage Guidelines

See Configuring the PPP Clear Loop Detected Timer.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.