idle-cycle-flag

Syntax


                        
                           idle-cycle-flag value;

Hierarchy Level


                        
                           [edit interface e1-fpc/pic/port],
                           
                           [edit interface t1-fpc/pic/port],
                           
                           [edit interfaces interface-name ds0-options],
                           
                           [edit interfaces interface-name e1-options],
                           
                           [edit interfaces interface-name e3-options],
                           
                           [edit interfaces interface-name serial-options],
                           
                           [edit interfaces interface-name t1-options],
                           
                           [edit interfaces interface-name t3-options]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Configure the value that the DS0, E1, E3, T1, or T3 interface transmits during idle cycles.

Note: When configuring E1 interfaces on the 10-port Channelized E1/T1 IQE PIC, idle-cycle-flag must be set at the [edit interface e1-fpc/pic/port] hierarchy level.

When configuring T1 interfaces on the 10-port Channelized E1/T1 IQE PIC, idle-cycle-flag must be set at the [edit interface t1-fpc/pic/port] hierarchy level.

Options

value—Value to transmit in the idle cycles:

Usage Guidelines

See Configuring the E1 Idle Cycle Flag, Configuring the E3 Idle Cycle Flag, Configuring the T1 Idle Cycle Flag, and Configuring the T3 Idle Cycle Flag.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.