- Download PDFs
- family
family
Syntax
- family family {
-
- accounting {
- destination-class-usage;
-
- source-class-usage {
- direction;
- }
- }
-
- address address {
- destination address;
- }
- bundle interface-name;
-
- filter {
- dialer filter-name;
- input filter-name;
- output filter-name;
- group filter-group-number;
- }
- interface-mode (access
| trunk);
- ipsec-sa sa-name;
- keep-address-and-control;
-
- llc2 {
- ack-delay-time time;
- ack-max count;
- idle-time time;
- local-window count;
- max-retry count;
- p-bit-timeout time;
-
- t1-time time;
- t2-time time;
- trej-time time;
- }
- mac-validate (loose
| strict);
- mtu bytes;
- multicast-only;
- negotiate-address;
- no-redirects:
-
- ;
- protocols [inet
iso mpls];
- proxy inet-address address;
- receive-options-packets;
- receive-ttl-exceeded;
- remote (inet-address address | mac-address address);
- rpf-check <fail-filter filter-name>;
-
- sampling {
- direction;
- }
-
- service {
-
- input {
- service-set service-set-name <service-filter filter-name>;
- post-service-filter filter-name;
- }
-
- output {
- service-set service-set-name <service-filter filter-name>;
- }
- }
- (translate-discard-eligible | no-translate-discard-eligible);
- (translate-fecn-and-becn | no-translate-fecn-and-becn);
- number;
- vlan-id-list [number number-number];
- interface-name address destination-profile profile-name;
-
- address address {
- arp ip-address (mac | multicast-mac) mac-address <publish>;
- broadcast address;
- address;
- destination-profile name;
- eui-64;
- multipoint-destination address dlci dlci-identifier;
-
- multipoint-destination address {
- cells;
- inverse-arp;
-
- oam-liveness {
- up-count cells;
- down-count cells;
- }
- oam-period (disable
| seconds);
-
- shaping {
- (cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);
- queue-length number;
- }
- vci vpi-identifier.vci-identifier;
- }
- ;
- preferred;
-
- (vrrp-group | vrrp-inet6-group) group-number {
- (accept-data | no-accept-data);
- advertise-interval seconds;
- authentication-type authentication;
- authentication-key key;
- fast-interval milliseconds;
-
- (preempt | no-preempt) {
- hold-time seconds;
- }
- priority-number number;
-
- track {
- priority-cost seconds;
-
- priority-hold-time interface-name {
- interface priority;
-
- bandwidth-threshold bits-per-second {
- priority;
- }
- }
- route ip-address/mask routing-instance instance-name priority-cost cost;
- }
- virtual-address [ addresses ];
- }
- }
- }
Hierarchy Level
Release Information
Statement introduced before JUNOS Release 7.4.
Description
Configure protocol family information for the logical interface.
Options
-
family—Protocol family:
- any—Protocol-independent family used for Layer 2 packet filtering
- bridge—(M-series and T-series routing platforms only) Configure only when the physical interface is configured with ethernet-bridge type encapsulation or when the logical interface is configured with vlan-bridge type encapsulation
- ccc—Circuit cross-connect protocol suite
- inet—Internet Protocol version 4 suite
- inet6—Internet Protocol version 6 suite
- iso—International Organization for Standardization Open Systems Interconnection (ISO OSI) protocol suite
- mlfr-end-to-end—Multilink Frame Relay FRF.15
- mlfr-uni-nni—Multilink Frame Relay FRF.16
- multilink-ppp—Multilink Point-to-Point Protocol
- mpls—Multiprotocol Label Switching (MPLS)
- tcc—Translational cross-connect protocol suite
- tnp—Trivial Network Protocol
- vpls—(M-series and T-series routing platforms
only) Virtual private LAN service
The remaining statements are explained separately.
Usage Guidelines
See Configuring the Protocol Family and the JUNOS Services Interfaces Configuration Guide.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.