delay-buffer-rate

Syntax


                        
                           delay-buffer-rate (percent percentage | rate | $junos-cos-delay-buffer-rate);

Hierarchy Level


                        
                           [edit dynamic-profiles profile-name class-of-service traffic-control-profiles profile-name]

Release Information

Statement introduced in JUNOS 7.6.

The [edit dynamic-profiles profile-name] hierarchy added in JUNOS Release 9.2.

The $junos-cos-delay-buffer-rate variable added in JUNOS Release 9.4.

Description

For EQ DPC interfaces, base the delay-buffer calculation on a delay-buffer rate.

Default

If you do not include this statement, the delay-buffer calculation is based on the guaranteed rate if one is configured, or the shaping rate if no guaranteed rate is configured.

Options

rate—For EQ DPC interfaces, delay-buffer rate, in bits per second (bps). You can specify a value in bits per second either as a complete decimal number or as a decimal number followed by the abbreviation k (1000), m (1,000,000), or g (1,000,000,000).
$junos-cos-delay-buffer-rate—JUNOS predefined variable that is replaced with the delay-buffer rate obtained from the RADIUS server when a subscriber authenticates over the subscriber interface to which the subscriber access dynamic profile is attached.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.