Download Software
Research a Problem
Case Management
Contract & Product Management
Technical Documentation
End-of-Life Products
Contact Support
Guidelines and Policies
Security Resources

clocking-mode

Syntax


                        
                           clocking-mode (dce | internal | loop);

Hierarchy Level


                        
                           [edit interfaces interface-name serial-options]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

For EIA-530 and V.35 interfaces, configure the clock mode. You cannot configure clocking-mode dce on a DTE router using an X.21 serial line protocol (detected automatically when an X.21 cable is plugged into the serial interface).

Options

dce—DCE timing (DTE mode only, not valid for X.21).
internal—Internal baud timing.
loop—Loop timing.

Usage Guidelines

See Configuring the Serial Clocking Mode.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration