byte-encoding

Syntax


                        
                           byte-encoding (nx56 | nx64);

Hierarchy Level


                        
                           [edit interface t1-fpc/pic/port]
                           
                           [edit interfaces interface-name ds0-options],
                           
                           [edit interfaces interface-name t1-options]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Set the byte encoding on a DS0 or T1 interface to use 7 bits per byte or 8 bits per byte.

Note: When configuring T1 interfaces on the 10-port Channelized E1/T1 IQE PIC, byte-encoding must be set at the [edit interface t1-fpc/pic/port] hierarchy level.

Default

The default byte encoding is 8 bits per byte (nx64).

Options

nx56—Use 7 bits per byte.
nx64—Use 8 bits per byte.

Usage Guidelines

See Configuring T1 Byte Encoding.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.